| 02329_FLUKA |
| 0CB689EE-132E-4559-A597-C79A40192203 |
| 14493-06-2 |
| 150036-83-2 |
| 295477_ALDRICH |
| 3B4-2254 |
| 463035_ALDRICH |
| 490210_ALDRICH |
| 74-82-8 |
| 8006-14-2 |
| AC1L18XA |
| AC1Q2825 |
| AG-E-08601 |
| AKOS005166816 |
| AR-1A0383 |
| AR-1A0497 |
| Biodiesels |
| Biogas |
| BRN 1718732 |
| C01438 |
| C5M |
| CH4 |
| CHEBI:16183 |
| CHEMBL17564 |
| CTK2H7747 |
| Fire Damp |
| HSDB 167 |
| KST-1A1445 |
| KST-1A1563 |
| Marsh gas |
| metano |
| methan |
| methane |
| Methane in gaseus state |
| Methane-12C |
| Methyl hydride |
| MolPort-018-618-244 |
| Natural gas |
| OP0UW79H66 |
| R 50 |
| R 50 (refrigerant) |
| tetrahydridocarbon |
| UN1971 |
| UN1972 |
| UNII-OP0UW79H66 |
| GLASSY CARBON |
| Nanotubes, Carbon |
| Carbonmesopor |
| EINECS 200-812-7 |
| Carbon (graphite) |
| Nanodiamond (particle size : |
| DTXSID8025545 |
| EC 200-812-7 |
| 4-01-00-00003 (Beilstein Handbook Reference) |
| Graphene quantum dots |
| Graphene film, monolayer, on copper foil (1cm x 1cm) |
| Carbon; Charcoal activated |
| METHANE (EP MONOGRAPH) |
| METHANE [EP MONOGRAPH] |
| 6532-48-5 |
| carbon fiber |
| MFCD00133992 |
| MFCD00144065 |
| MFCD00146977 |
| MFCD00211867 |
| MFCD09753896 |
| MFCD31654066 |
| Single-walled carbon nanotubes (SWNTs) |
| Methylidyne radical |
| CVD Graphene on Si 1cmx1cm(3-5 layers) |
| High Purity Single-walled Carbon Nanotubes |
| Multi-walled carbon nanotubes (MWNTs), 95+% |
| Graphitized Multi-Walled Carbon Nanotubes 8-15nm |
| Graphitized Hydroxy Multi-Walled Carbon Nanotubes 8-15nm |
| Hydroxy Double-Walled Crabon Nanotubes (DWNTs-OH) 2-4nm |
| Total Organic Carbon Standard: TOC @ 1000 mg/L in H2O |
| thin graphene |
| Carbon,mesopor |
| acetylene carbon |
| Carbon dots |
| Carbon Granules |
| Carbon Nanorods |
| Thiol Graphene |
| a methyl group |
| Carbon Fabric |
| Carbon Pieces |
| Carbon Slugs |
| Graphene Kit |
| Carbon Foam |
| Carbon Nanofiber |
| Carbon Nanohorns |
| GO quantum dots |
| Gas, natural |
| Carbon Electrodes |
| Mesoporous Carbon |
| monohydride carbon |
| Carbon NanoFibers |
| N-doped Graphene |
| N-doped Grpahene |
| Carbon nano fibers |
| Carbon quantum dot |
| Carbon black, CP |
| high purity SWNTs |
| Multiwall Nanotubes |
| Carbon rods, 5N |
| N-doped MWCNTs |
| 74C |
| Fullerene C-70 |
| Carbon Nanotube Ink |
| Carbon Quantum Dots |
| Fluorinated Graphene |
| MWCNTs water paste |
| Carbon, decolorizing |
| Graphene oxide flake |
| Aqua Graphene slurry |
| Fullerene - C70 |
| CARBONEUM |
| Flash-ignited MWNTs |
| Electrode pole pieces |
| Graphene oxide powder |
| Graphite oxide powder |
| Liquified natural gas |
| Synthetic natural gas |
| Carbon Conductive Ink |
| rGO-NH-Carboimidazole |
| Carbon Graphite Plates |
| Conductive carbon black |
| MWNTs water suspension |
| Carbon Black Nanopowder |
| GO quantum dots powder |
| Nitrogen doped CMK-3 |
| Graphene oxide, reduced |
| Graphene slurry in NMP |
| MWNTs DMSO suspension |
| PEG@GO |
| PEI@GO |
| Carbon nitride catalysts |
| Carboxyl Graphene powder |
| MWCNTs water suspension |
| Graphene slurry in water |
| METHANE [HSDB] |
| CARBONEUM [HPUS] |
| GO quantum dots(Powder) |
| METHANE [MI] |
| MWCNTs(long) 4-6nm |
| Carbon Dots Bright Green |
| Carbon Quantum Dots Blue |
| Tunable Nanoporous Carbon |
| BLACK 2 |
| Carbon Fiber Cloth Fabric |
| Carbon Nanorods Properties |
| Carboxyl Carbon Dots Blue |
| FluorinatedCarbon Nanotubes |
| MWNTs(short) 4-6 nm |
| NanoIntegris Dielectic ink |
| GrapheitizedMWNT 8-15nm |
| MWCNTs(long) 5-15nm |
| Carbon Black Nanodispersion |
| Disodered Mesoporous Carbon |
| GO quantum dots (solvent) |
| BLACK 2 [INCI] |
| Carbon, 200 mesh,Powder |
| DC BLACK NO. 2 |
| Grapheitized MWNTs >50nm |
| Graphene quantum dots green |
| Methane, >=99.0% |
| Customized MWNTs dispersion |
| Reduced Graphene Oxide@ Ag |
| Carbon Conductive Ink Paste |
| Carbon nanotubes DMF slurry |
| Carbon nanotubes NMP slurry |
| Double-wall carbon nanotubes |
| GO quantum dots(20mg/ml) |
| Graphene Nanoplate 1-5 nm |
| Graphene slurry H:3-10nm |
| Methane, analytical standard |
| MWNTs(short) 5-15 nm |
| MWNTs(short) 8-15 nm |
| Single layer graphene powder |
| 4QQN74LH4O |
| CARBON BLACK [HSDB] |
| CARBON BLACK [IARC] |
| CARBON BLACK [INCI] |
| CH2H2 |
| CMK-3 |
| CMK-8 |
| Double-walledcarbon nanotubes |
| GCB graphitized carbon black |
| Graphene Dispersion in water |
| Graphene nanoplates 1-5 nm |
| MWCNTs(long) 20-30nm |
| MWCNTs(long) 8-15 nm |
| UNII-6GRV67N0U2 |
| Carbon Nanofibers Graphitized |
| Graphene Oxide Carboimidazole |
| Industrial Graphene Nanoplate |
| Nano Carbon Black Dispersion |
| Single Wall Carbon Nanohorns |
| Soot Carbon Black Nanopowder |
| Carbon, 99.5%,30nm |
| Graphene Nanoplate 3-10 nm |
| MWNTs(short) 20-30 nm |
| MWNTs(short) 30-50 nm |
| Nanointegris ultrapure SWCNTs |
| UN 1971 (Salt/Mix) |
| UN 1972 (Salt/Mix) |
| Carboxyl Graphene quantum dots |
| Customized Graphene Dispersion |
| Graphene quantum dots(Powder) |
| Graphitized MWNTs 10-20nm |
| Low Purity Carboxylic SWCNTs |
| Multiwall Nanotubes 5-15 nm |
| N-doped Graphene quantum dots |
| GO quantum dots(C: 1mg/ml) |
| Grapheitized MWNTs 20-30nm |
| Grapheitized MWNTs 30-50nm |
| Low purity Hydroxylate SWCNTs |
| Megnetic Graphene Oxide powder |
| MWNTs ethyl acetate suspension |
| Reduced Graphene Oxide@ SnO2 |
| Thin Layer Graphene Nanoplates |
| Carbon nanotubes aqueous slurry |
| Carboxylate Graphene Dispersion |
| Fullerene soot, (as produced) |
| Laser Scribed Graphene (LSG) |
| Multiwall Nanotubes-OH Hydroxy |
| MWNTs Butyl acetate suspension |
| UNIPURE BLACK LC 902 |
| 4XYU5U00C4 |
| 6GRV67N0U2 |
| Carboxyl MWCNTs(long) <8 nm |
| Carboxyl MWCNTs(long) 4-6nm |
| DTXCID705545 |
| GO quantum dots yellow(Powder) |
| Industrial grade MWNTs 50 nm |
| MWNTs (long) 10-20 nm |
| Graphene electric aqueous slurry |
| Graphene Film(Filtering method) |
| Graphene powder Physical methods |
| Reduced Graphene Oxide@ Co3O4 |
| Reduced Graphene Oxide@ Fe3O4 |
| Singlewall Nanotubes-OH Hydroxy |
| Carbon Conductive Adhesive Tapes |
| Carbon Nanotube sponges XFCN01 |
| Carbon Nanotube sponges XFCN07 |
| Carbon Nanotube sponges XFCN08 |
| Carboxyl MWCNTs(short) 4-6nm |
| CHEMBL2106049 |
| Diamond Synthesized, 95% Nano |
| Diethyl Cyanomethyl Phosphonate |
| Graphene Sponges(Foams,Aerogel) |
| Industrial Graphene Oxide Powder |
| Carbon conductive cement adhesive |
| Conductive Flexible TPU Filament |
| GO quantum dots yellow(1mg/ml) |
| High Purified Carboxylic SWCNTS |
| Ultrapure SWCNTs NMP dispersion |
| Amino Graphene quantum dot powder |
| Carbon black, Super P Conductive |
| DTXSID50179391 |
| DTXSID60176836 |
| Graphene Sponges (Foams,Aerogel) |
| High Purified Hydroxylate SWCNTS |
| Lowpurity hydroxy SWCNTs (long) |
| NanoIntegris metallic SWCNTs70% |
| NanoIntegris metallic SWCNTs90% |
| NanoIntegris metallic SWCNTs95% |
| VEGETABLE CARBON [MART.] |
| Vitamin C Reduced Graphene Oxide |
| Lowpurity carboxyl SWCNTs (long) |
| Megnetic Graphene Oxide dispersion |
| Carbon nanotubes isopropanol slurry |
| CI 77266 [INCI] |
| D&C BLACK NO. 2 [II] |
| Industrial grade MWNTs 10-20nm |
| Industrial grade MWNTs 20-30nm |
| Industrial grade MWNTs 50-60nm |
| Industrial grade MWNTs 8-15 nm |
| Industrial grade MWNTs 9-16 nm |
| Industrial Thin Graphene Nanoplate |
| MWNTs isopropyl alcohol suspension |
| Carboxyl MWCNTs(short) 5-15 nm |
| Carboxyl MWCNTs(short) 8-15 nm |
| Graphene Powder with small diameter |
| Graphene quantum dots(C: 1mg/ml) |
| Industrial grade MWCNTs 8-15 nm |
| Isotopic 13C Graphene on Cu Foil |
| Large diameter graphene oxide sheet |
| NanoIntegris metallic SWCNTs 98% |
| NanoIntegris metallic SWCNTs 99% |
| AMY33424 |
| Carbon powder, 99.999%, 5N |
| Graphene Oxide dispersion <500 nm |
| Graphene Oxide dispersion >500 nm |
| Heat Dissipation Graphene Oxide Mud |
| HelicalMulti-walled carbon nanotubes |
| High purity SWNTs 0.7-2.5 nm |
| Highpurity carboxyl SWCNTs (short) |
| Industrial grade MWNTs 13-17 nm |
| Industrial Grade MWNTs 20-40 nm |
| Largeinner diameter thin-wall MWNTs |
| Monolayer Graphene on SiC substrate |
| Ultrapure SWCNTs aqueous dispersion |
| UNIPURE BLACK LC 902 GRAN |
| VEGETABLE CARBON (E 153) |
| EINECS 232-343-9 |
| EINECS 240-383-3 |
| Graphene quantum dots(MC: 1mg/ml) |
| Graphite flake, natural, -10 mesh |
| Graphite ink for tantalum capacitors |
| High purity carboxyl SWCNTs (long) |
| Aligned Multi-walled carbon nanotubes |
| Carboxyl Graphene dispersion <500nm |
| Carboxyl Graphene quantum dots powder |
| Diamond Powder (gray), 97+% Nano |
| Diamond Powder (gray), 98+% Nano |
| Grapheitized Carboxyl MWNTs >50 nm |
| Grapheitized Carboxyl MWNTs 8-15nm |
| GrapheitizedCarboxyl MWNTs 10-20nm |
| GrapheitizedCarboxyl MWNTs 20-30nm |
| GrapheitizedCarboxyl MWNTs 30-50nm |
| Graphite flake, median 7-10 micron |
| Graphite powder, <20 um, synthetic |
| Helical Multi-walled carbon nanotubes |
| MFCD06411993 |
| MFCD07370731 |
| NA1361 |
| NanoIntegris SWCNTs with high purity |
| Carbon nanotubes butyl butyrate slurry |
| CVD Graphene Film on Nickel 5cmx5cm |
| Graphene oxide dispersion 1-5 layers |
| Graphene quantum dots red fluorescence |
| Graphite flake, natural, -325 mesh |
| Hydroxylate MWNTs(short) 30-50 nm |
| Raw Plasma Nanotubes Powder RN-020 |
| CVD Graphene on Si 1cmx1cm(Bilayer) |
| Diamond powder, synthetic, <1 micron |
| Grapheitized Hydroxylate MWNT 8-15nm |
| GrapheitizedHydroxylate MWNTs >50 nm |
| Graphene Oxide Film(Filtering method) |
| Graphite foil, 1mm (0.04in) thick |
| Industrial Carboxylic SWCNTs 1-2 nm |
| Single Layer Graphene dispersion water |
| Single walled Carbon Nanotubes on PET |
| Amination multi-walled carbon nanotubes |
| CVDGraphene on SiO2 5cmx5cm(Bilayer) |
| DB09278 |
| GrapheitizedHydroxylate MWNTs 10-20nm |
| GrapheitizedHydroxylate MWNTs 30-50nm |
| Graphene Oxide dispersion water or NMP |
| Graphite rod, 5.0mm (0.20in) dia |
| HIPCO pure Metallic Hipco SWNTs solid |
| Industrial Hydroxylate SWCNTs 1-2 nm |
| N-doped MWCNTs (N Content2.98wt%) |
| NanoIntegris metallic SWCNTs70% solid |
| NanoIntegris metallic SWCNTs90% solid |
| NanoIntegris metallic SWCNTs95% solid |
| Carbon felt, 1.27cm (0.5in) thick |
| Carbon felt, 2.54cm (1.0in) thick |
| Carboxylic Multi-walled Carbon Nanotubes |
| CarboxylicDouble walled carbon nanotubes |
| CVD Graphene on Si 1cmx1cm(Monolayer) |
| Graphite plate, 2.5cm (1.0in) thick |
| HIPCO Semiconducting Hipco SWNTs solid |
| Imported Reduced Graphene Oxide@ Fe3O4 |
| N-doped MWCNTS (N Content3.00wt%) |
| Nanoinnova Graphene Oxide-Carboimidazole |
| NanoIntegris semiconductive SWCNTs 90% |
| NanoIntegris semiconductive SWCNTs 95% |
| NanoIntegris semiconductive SWCNTs 98% |
| NanoIntegris semiconductive SWCNTs 99% |
| Ultrapure Single-walled carbon nanotubes |
| Aminated Graphene TEPA covalently linked |
| Carbon black, acetylene, 50% compressed |
| Carbon felt, 6.35mm (0.25in) thick |
| Carboxyl MWCNTs water paste (~10wt%) |
| CVD Graphene on Glass 1cmx1cm(Bilayer) |
| CVD Graphene on SiO2 1cmx1cm(Bilayer) |
| CVD Graphene on SiO2 2cmx2cm(Bilayer) |
| CVD Graphene on SiO2 7cmx7cm(Bilayer) |
| CVDGraphene on SiO2 5cmx5cm(Monolayer) |
| Diamond Powder (black), 52-65% Nano |
| Grapheitized Hydroxylate MWNTs 20-30nm |
| Graphite foil, 0.5mm (0.02in) thick |
| Graphite rod, 10.0mm (0.40in) dia |
| High Purified Large Surface Area SWCNTS |
| Industrial Few Layer Graphene Nanoplates |
| Multiwall Nanotubes-OH Hydroxy 5-15 nm |
| NanoIntegris metallic SWCNTs 98% solid |
| NanoIntegris metallic SWCNTs 99% solid |
| Reduced Graphene Oxide-NH-Carboimidazole |
| SingleWalled Carbon nanotubes NMP slurry |
| 4H-Pyrrolo[1,2-d][1,4]oxazocine-9-carboxaldehyde,1,2,5,6-tetrahydro-6-hydroxy-4,5-dimethyl-2-oxo-, (4R,5R,6S)-rel- |
| Carboxyl MWCNTs water paste (~2.7wt%) |
| CVD Graphene on Quartz 1cmx1cm(Bilayer) |
| Graphite plate, 1.27cm (0.5in) thick |
| High-Ni Calibration series, O 38x15 mm |
| HIPCO pure Metallic Hipco SWNTs Aqueous |
| HIPCO Semiconducting Hipco SWNTs Aqueous |
| Methane, electronic grade, >=99.998% |
| Monolayer Graphene Powder Chemical method |
| N-doped Graphene Sponges (Foams,Aerogel) |
| P-doped Graphene Sponges (Foams,Aerogel) |
| PD053877 |
| Preservative Reduce Graphene Oxide Powder |
| Purified Plasma Nanotubes Powder RN-220 |
| Short ultrapure SWCNTs aqueous dispersion |
| Ultrapure Short SWCNTs aqueous dispersion |
| Acetylene carbon black (100% compressed) |
| Carbon felt, 3.18mm (0.125in) thick |
| CarboxylDouble-wall carbon nanotubes(long) |
| CVD Graphene on Glass 1cmx1cm(Monolayer) |
| CVD Graphene on Plastic 1cmx1cm(Bilayer) |
| CVD Graphene on Si 1cmx1cm(6-8 layers) |
| CVD Graphene on SiO2 1cmx1cm(Monolayer) |
| CVD Graphene on SiO2 2cmx2cm(Monolayer) |
| CVD Graphene on SiO2 7cmx7cm(Monolayer) |
| Diamond powder, synthetic, 40-60 micron |
| Graphite foil, 0.4mm (0.015in) thick |
| Graphite Oxide powder prepared by S method |
| Graphite Powders, 99.9% (metals basis) |
| High Purified Single-walled carbonnanotubes |
| HighPurified Single-walled carbon nanotubes |
| Hydroxy Graphene quantum dots(C: 1mg/ml) |
| Industrial grade carboxylation MWNTs 50nm |
| Methane, Messer(R) CANGas, 99.999% |
| Multi-walled carbon nanotubes(long) >50nm |
| Multiwalled carbon nanotube DMF dispersion |
| NanoIntegris semiconductive SWCNTs 99.9% |
| Purified Amio Single-walled carbonnanotubes |
| Aminated Graphene quantum dots(C: 1mg/ml) |
| B-doped Graphene Sponges (Foams, Aerogels) |
| Carbon Nanotubes Thermal Radiation Coatings |
| Carboxyl Double-wall carbon nanotubes(long) |
| Carboxyl Graphene quantum dots(C: 1mg/ml) |
| CVD Graphene on Quartz 1cmx1cm(Monolayer) |
| CVD Graphene on Si 2.5cmx2.5cm(Bilayer) |
| CVDGraphene on SiO2 5cmx5cm(3-5 layers) |
| CVDGraphene on SiO2 5cmx5cm(6-8 layers) |
| Graphene Oxide dispersion customized service |
| Graphite foil, 0.13mm (0.005in) thick |
| Graphite foil, 0.254mm (0.01in) thick |
| Graphite powder, nickel coated, -100 mesh |
| Graphite powder, synthetic, -20+100 mesh |
| Imported loaded nano-gold particles graphene |
| Multi-walled carbon nanotube DMF dispersion |
| Single Layer H-BN Film on SIO2 substrate |
| Carbon nanotubes, single-walled/double-walled |
| Carbon, mesoporous, hydrophilic pore surface |
| CVD Graphene on Copper Foil1cmx1cm(Bilayer) |
| CVD Graphene on Glass 1cmx1cm(3-5 layers) |
| CVD Graphene on Glass 1cmx1cm(6-8 layers) |
| CVD Graphene on Plastic 1cmx1cm(Monolayer) |
| CVD Graphene on SiO2 1cmx1cm(3-5 layers) |
| CVD Graphene on SiO2 1cmx1cm(6-8 layers) |
| CVD Graphene on SiO2 2cmx2cm(3-5 layers) |
| CVD Graphene on SiO2 2cmx2cm(6-8 layers) |
| CVD Graphene on SiO2 7cmx7cm(3-5 layers) |
| CVD Graphene on SiO2 7cmx7cm(6-8 layers) |
| Fluorinated Carbon Nanotubes(F48-50 wt.%) |
| Fluorinated Carbon Nanotubes(F48-58 wt.%) |
| Graphene dispersion(C:1mg/ml solvent:water) |
| Graphene Spones (foams)(Size: 2cmx2cmx2cm) |
| Graphene Spones (foams)(Size: 5cmx5cmx5cm) |
| Hydroxylation Single Nanotubes 0.7-2.5 nm |
| Multi wall carbon nanotubes (MWNTs)>50 nm |
| Multi-walled carbon nanotubes NMP dispersion |
| Multi-walled carbon nanotubes(short) >50 nm |
| NS00004509 |
| NS00081852 |
| NS00093167 |
| Single-walled carbon nanotubes (SWNTs-COOH) |
| Aminated Graphene Amino-PEG covalently linked |
| Aminated Graphene Piperazine covalently linked |
| Carbon nanotubes, multi-walled, core material |
| Carbon, foil, 5x5mm, thickness 2.0mm, hOpg |
| Carboxylic ultrapure SWCNTs aqueous dispersion |
| CVD Graphene on Quartz (1mm1cmx1cm(Bilayer) |
| CVD Graphene on Quartz 1cmx1cm(3-5 layers) |
| CVD Graphene on Quartz 1cmx1cm(6-8 layers) |
| CVD Graphene on Si 2.5cmx2.5cm(Monolayer) |
| Electric Heating Reduce Graphene Oxide Powder |
| Graphene dispersion(C:1mg/ml solvent:ethanol) |
| Graphite powder, synthetic, APS 7-11 micron |
| Graphite, colloidal, lubricant, aerosol spray |
| Multi-walled carbon nanotubes (MWNTs), 95% |
| Multi-walled carbon nanotubes(short) 10-20nm |
| NanoIntegris semiconductive SWCNTs 90% solid |
| NanoIntegris semiconductive SWCNTs 95% solid |
| NiCoated Multi-walled carbon nanotubes >50nm |
| Carbon, foil, 5x10mm, thickness 2.0mm, hOpg |
| Carboxyl Graphene quantum dots(Purity: ~80%) |
| CVD Graphene on Copper Foil 2cmx2cm(Bilayer) |
| CVD Graphene on Copper Foil 5cmx5cm(Bilayer) |
| CVD Graphene on Copper Foil1cmx1cm(Monolayer) |
| CVD Graphene on Plastic 1cmx1cm(3-5 layers) |
| CVD Graphene on Plastic 1cmx1cm(6-8 layers) |
| CVD Graphene on Quartz (1mm1cmx1cm(Monolayer) |
| Dispersion Carboxyl Graphene dispersion >500nm |
| Double-Walled Crabon Nanotubes (DWNTs) 2-4nm |
| EC 231-953-2 |
| EC 231-955-3 |
| EC 240-383-3 |
| Glassy carbon rod, 3mm (0.1in) dia, type 1 |
| Glassy carbon rod, 3mm (0.1in) dia, type 2 |
| Glassy carbon rod, 5mm (0.2in) dia, type 1 |
| Glassy carbon rod, 5mm (0.2in) dia, type 2 |
| Graphene dispersion(C:0.5mg/ml solvent:water) |
| Graphene Quantum Dot Powder(White fluorescence) |
| Graphene Spones (foams)(Size: D 1cm,H 1cm) |
| High concentration MWCNTs water paste(~14wt%) |
| High purity Carboxyl SWCNTs aqueous dispersion |
| High purity Single-walled carbonnanotubes(long) |
| Industrial grade carboxylation MWNTs 20-40 nm |
| Industrial grade hydroxylation MWCNTs 10-30nm |
| Industrial grade hydroxylation MWCNTs 20-40nm |
| IsoNanotubes-S 99.9%Pure Semiconducting SWNT |
| Low purity single-walled carbon nanotubes(long) |
| Multi-walled carbon nanotubes (MWNTs), 90+% |
| Multi-walled carbon nanotubes(short) 30-50 nm |
| Q37129 |
| Short-hydroxylate multi-walled carbon nanotubes |
| Single Layer Graphene on PET 1cmx1cm(Bilayer) |
| Single Layer Graphene on PET 2cmx2cm(Bilayer) |
| Single Layer Graphene on PET 5cmx5cm(Bilayer) |
| Sulfur-doped graphene sponges (S-GS,,Aerogel) |
| Carbon, foil, 10x10mm, thickness 2.0mm, hOpg |
| Carbon, foil, 15x15mm, thickness 2.0mm, hOpg |
| Chlorine-based Graphene quantum dots(C: 1mg/ml) |
| CVD Graphene on Copper Foil 10cmx10cm(Bilayer) |
| CVD Graphene on Copper Foil 10cmx5cm(Bilayer) |
| CVD Graphene on Copper Foil 15cmx10cm(Bilayer) |
| CVD Graphene on Copper Foil 2cmx2cm(Monolayer) |
| CVD Graphene on Copper Foil 30cmx20cm(Bilayer) |
| CVD Graphene on Copper Foil 5cmx5cm(Monolayer) |
| CVD Graphene on Si 2.5cmx2.5cm(3-5 layers) |
| CVD Graphene on Si 2.5cmx2.5cm(6-8 layers) |
| Glassy carbon rod, 1mm (0.04in) dia, type 1 |
| Glassy carbon rod, 1mm (0.04in) dia, type 2 |
| Glassy carbon rod, 2mm (0.08in) dia, type 1 |
| Glassy carbon rod, 2mm (0.08in) dia, type 2 |
| Glassy carbon rod, 4mm (0.16in) dia, type 1 |
| Glassy carbon rod, 4mm (0.16in) dia, type 2 |
| Glassy carbon rod, 6mm (0.24in) dia, type 1 |
| Glassy carbon rod, 6mm (0.24in) dia, type 2 |
| Glassy carbon rod, 7mm (0.28in) dia, type 1 |
| Glassy carbon rod, 7mm (0.28in) dia, type 2 |
| Graphene dispersion(C:0.5mg/ml solvent:ethanol) |
| High Purity Single-walled carbonnanotubes(short) |
| Imported loaded nano-Palladium particles graphene |
| Low purity single-walled carbon nanotubes(short) |
| Nano Au (0) particles on reduced Graphene Oxide |
| Nano Pd (0) particles on reduced Graphene Oxide |
| NanoIntegris semiconductive SWCNTs 99.9% solid |
| Ni Coated Multi-walled carbon nanotubes 8-15nm |
| Ni Coated Multi-walled carbon nanotubes20-30nm |
| Ni Coated Multi-walled carbon nanotubes30-50nm |
| Single Layer Graphene on PET 10cmx5cm(Bilayer) |
| Single Layer Graphene on PET 1cmx1cm(Monolayer) |
| Single Layer Graphene on PET 2cmx2cm(Monolayer) |
| Single Layer Graphene on PET 5cmx5cm(Monolayer) |
| Super Purified Plasma Nanotubes Powder SPT-220 |
| 3D Freestanding Graphene Foam 1cmx1cm(on Nickel) |
| Aminated Graphene Octadecylamine covalently linked |
| Carboxyl Multi-walled carbonnanotubes(long) >50nm |
| Conductive Graphene Filament,3D Printing Materials |
| CVD Graphene Film on Nickel 1-7 layers ,1cmx1cm |
| CVD Graphene on Copper Foil 10cmx10cm(Monolayer) |
| CVD Graphene on Copper Foil 10cmx5cm(Monolayer) |
| CVD Graphene on Copper Foil 15cmx10cm(Monolayer) |
| CVD Graphene on Copper Foil 2cmx2cm(3-5 layers) |
| CVD Graphene on Copper Foil 2cmx2cm(6-8 layers) |
| CVD Graphene on Copper Foil 30cmx20cm(Monolayer) |
| CVD Graphene on Copper Foil 5cmx5cm(3-5 layers) |
| CVD Graphene on Copper Foil 5cmx5cm(6-7 layers) |
| CVD Graphene on Copper Foil1cmx1cm(3-5 layers) |
| CVD Graphene on Copper Foil1cmx1cm(6-8 layers) |
| CVD Graphene on Quartz (1mm1cmx1cm(3-5 layers) |
| CVD Graphene on Quartz (1mm1cmx1cm(6-8 layers) |
| Glassy carbon plate, 3mm (0.1in) thick, type 1 |
| Glassy carbon plate, 3mm (0.1in) thick, type 2 |
| Graphite powder, natural, high purity, -200 mesh |
| Large-Inner Diameter Multi-walled carbon nanotubes |
| Methane-12C, 13C-depleted, 99.9 atom % 12C |
| Ni Coated Multi-walled carbon nanotubes 10-20nm |
| Purified amio single-walled carbon nanotubes 1-2nm |
| Q866179 |
| Single Layer Graphene on PET 10cmx5cm(Monolayer) |
| Carbon Nanotube Dispersant / CNTs Water Dispersant |
| Carbon nanotubes, multi-walled, ground core material |
| CVD Graphene on Copper Foil 10cmx5cm(3-5 layers) |
| CVD Graphene on Copper Foil 10cmx5cm(6-8 layers) |
| Glassy carbon plate, 1mm (0.04in) thick, type 1 |
| Glassy carbon plate, 1mm (0.04in) thick, type 2 |
| Glassy carbon plate, 2mm (0.08in) thick, type 1 |
| Glassy carbon plate, 2mm (0.08in) thick, type 2 |
| Glassy carbon plate, 4mm (0.16in) thick, type 1 |
| Glassy carbon plate, 4mm (0.16in) thick, type 2 |
| Graphitized Multi-Walled Carbon Nanotubes >50 nm |
| Graphitized Multi-Walled Carbon Nanotubes 10-20nm |
| Graphitized Multi-Walled Carbon Nanotubes 20-30nm |
| Graphitized Multi-Walled Carbon Nanotubes 30-50nm |
| Highly Oriented Pyrolytic Graphite (HOPG-Grade A) |
| Highly Oriented Pyrolytic Graphite (HOPG-Grade B) |
| Highly Oriented Pyrolytic Graphite (HOPG-Grade C) |
| IsoSol-S100 Pure SemiconductingSWNT+Dielectric ink |
| Q-200950 |
| Q3333711 |
| Q6823951 |
| Single Layer Graphene on PET 1cmx1cm(3-5 layers) |
| Single Layer Graphene on PET 1cmx1cm(6-8 layers) |
| Single Layer Graphene on PET 2cmx2cm(3-5 layers) |
| Single Layer Graphene on PET 2cmx2cm(6-8 layers) |
| Single Layer Graphene on PET 5cmx5cm(3-5 layers) |
| Single Layer Graphene on PET 5cmx5cm(6-8 layers) |
| 3D Freestanding Graphene Foam 1cmx1cm(substrate-free) |
| Bilayer Graphene on SiO2/Si(Size of SiO2: 1cmx1cm) |
| Bilayer Graphene on SiO2/Si(Size of SiO2: 2cmx2cm) |
| Carbon Nanotube Dispersant / CNTs Alcohol Dispersant |
| Carbon, rod, 100mm, diameter 25mm, graphite, 100% |
| Carbon, rod, 150mm, diameter 25mm, graphite, 100% |
| Carbon, rod, 50mm, diameter 1.5mm, graphite, 100% |
| Carbon, rod, 50mm, diameter 25mm, graphite, 100% |
| Carboxyl Multi-walled carbonnanotubes(long) 30-50 nm |
| CVD Graphene on Copper Foil 10cmx10cm(3-5 layers) |
| CVD Graphene on Copper Foil 10cmx10cm(6-8 layers) |
| CVD Graphene on Copper Foil 15cmx10cm(3-5 layers) |
| CVD Graphene on Copper Foil 15cmx10cm(6-8 layers) |
| CVD Graphene on Copper Foil 30cmx20cm(3-5 layers) |
| CVD Graphene on Copper Foil 30cmx20cm(6-8 layers) |
| Glassy carbon splinter powder, 20-50 micron, type 1 |
| Graphene Oxide Film Filtering method(size: 4cmX4cm ) |
| Graphene Oxide Film Filtering method(size: 8cmX8cm ) |
| Industrial Grade Multi-walled carbon nanotubes >50 nm |
| Monolayer Graphene on SiO2/Si(Size of SiO2:1cmx1cm) |
| Purified Multi-walled carbon nanotubes (MWNTs) <8nm |
| Q11172462 |
| Single Layer Graphene on PET 10cmx5cm(3-5 layers) |
| Single Layer Graphene on PET 10cmx5cm(6-8 layers) |
| Trivial Transfer Graphenetrade mark 1cmx1cm(Bilayer) |
| Trivial Transfer Graphenetrade mark 1cmx1cm(Monolayer) |
| Trivial Transfer Graphenetrade mark 5cmx5cm(Bilayer) |
| Trivial Transfer Graphenetrade mark 5cmx5cm(Monolayer) |
| Bilayer Graphene on SiO2/Si(Size of SiO2:5cmx1.5cm) |
| Carbon yarn, woven from 0.076mm (0.003in) dia fibers |
| Carbon, rod, 100mm, diameter 2.0mm, graphite, 100% |
| Carbon, rod, 100mm, diameter 3.0mm, graphite, 100% |
| Carbon, rod, 100mm, diameter 5.0mm, graphite, 100% |
| Carbon, rod, 150mm, diameter 2.0mm, graphite, 100% |
| Carbon, rod, 150mm, diameter 3.0mm, graphite, 100% |
| Carbon, rod, 150mm, diameter 5.0mm, graphite, 100% |
| Carbon, rod, 25mm, diameter 50mm, graphite, 99.95% |
| Carbon, rod, 2mm, diameter 0.5mm, graphite, 99.95% |
| Carbon, rod, 300mm, diameter 2.0mm, graphite, 100% |
| Carbon, rod, 300mm, diameter 3.0mm, graphite, 100% |
| Carbon, rod, 300mm, diameter 5.0mm, graphite, 100% |
| Carbon, rod, 50mm, diameter 25mm, graphite, 99.95% |
| Carbon, rod, 50mm, diameter 50mm, graphite, 99.95% |
| Glassy carbon spherical powder, 0.4-12 micron, type 1 |
| Glassy carbon spherical powder, 0.4-12 micron, type 2 |
| Glassy carbon spherical powder, 10-20 micron, type 1 |
| Glassy carbon spherical powder, 10-20 micron, type 2 |
| Glassy carbon splinter powder, 0.4-12 micron, type 1 |
| Glassy carbon splinter powder, 0.4-12 micron, type 2 |
| Glassy carbon splinter powder, 80-200 micron, type 1 |
| Glassy carbon splinter powder, 80-200 micron, type 2 |
| Graphene nanoplatelets (6-8 nm thick x 5 microns wide) |
| Graphene Oxide Film Filtering method(size: 15cmX15cm ) |
| Graphite powder, natural, briquetting grade, -100 mesh |
| Graphite powder, natural, briquetting grade, -200 mesh |
| Graphite powder, synthetic, conducting grade, -200 mesh |
| Graphite powder, synthetic, conducting grade, -325 mesh |
| Graphite rod, 3.8cm (1.5in) dia x 61cm (24in) long |
| Graphitized Carboxyl MultiWalled Carbon Nanotubes >50 nm |
| High concentration carboxyl MWCNTs water paste(~13wt%) |
| Industrial Grade Multi-walled carbon nanotubes 10-30 nm |
| Industrial Grade Multi-walled carbon nanotubes 12-15 nm |
| Monolayer Graphene on SiO2/Si(Size of SiO2: 2cmx2cm) |
| Nanointegris SWCNTs with small diameter Fe Catalyst 35% |
| Nanointegris SWCNTs with small diameter Fe Catalyst 5% |
| Nanointegris SWCNTs with small diameter Fe Catalyst15% |
| Purified Multi-walled carbon nanotubes (MWNTs) 10-20nm |
| Purified Multi-walled carbon nanotubes (MWNTs) 20-30nm |
| Purified Multi-walled carbon nanotubes (MWNTs) 30-50nm |
| Purified Single-walled carbon nanotubes (SWNTs) 1-2 nm |
| Total Organic Carbon Standard: TOC @ 100 mg/L in H2O |
| Trivial Transfer Graphenetrade mark 1cmx1cm(3-5 layers) |
| Trivial Transfer Graphenetrade mark 1cmx1cm(6-8 layers) |
| Trivial Transfer Graphenetrade mark 5cmx5cm(3-5 layers) |
| Trivial Transfer Graphenetrade mark 5cmx5cm(6-8 layers) |
| Carbon Nanotube Sponges (L: 1 cm, W: 1 cm, H: 1 cm) |
| Carbon Nanotube Sponges (L: 2 cm, W: 2 cm, H: 1 cm) |
| Carbon nanotubes, multi-walled, as produced cathode deposit |
| Carbon, rod, 100mm, diameter 1.0mm, graphite, 99.95% |
| Carbon, rod, 100mm, diameter 10.0mm, graphite, 100% |
| Carbon, rod, 100mm, diameter 13.0mm, graphite, 100% |
| Carbon, rod, 100mm, diameter 25mm, graphite, 99.95% |
| Carbon, rod, 100mm, diameter 50mm, graphite, 99.95% |
| Carbon, rod, 100mm, diameter 6.35mm, graphite, 100% |
| Carbon, rod, 150mm, diameter 10.0mm, graphite, 100% |
| Carbon, rod, 150mm, diameter 13.0mm, graphite, 100% |
| Carbon, rod, 150mm, diameter 25mm, graphite, 99.95% |
| Carbon, rod, 150mm, diameter 50mm, graphite, 99.95% |
| Carbon, rod, 150mm, diameter 6.35mm, graphite, 100% |
| Carbon, rod, 300mm, diameter 10.0mm, graphite, 100% |
| Carbon, rod, 300mm, diameter 13.0mm, graphite, 100% |
| Carbon, rod, 300mm, diameter 25mm, graphite, 99.95% |
| Carbon, rod, 300mm, diameter 6.35mm, graphite, 100% |
| Carbon, rod, 50mm, diameter 0.5mm, graphite, 99.95% |
| Carbon, rod, 50mm, diameter 1.0mm, graphite, 99.95% |
| Fullerene, buckytube/nanotube, single walled, > 60% SWNT |
| Fullerene, buckytube/nanotube, single walled, 20-35% SWNT |
| Funct. multi-walled carbon nanotubes (MWNTs-COOH), 95+% |
| Glassy carbon spherical powder, 200-400 micron, type 1 |
| Glassy carbon spherical powder, 200-400 micron, type 2 |
| Glassy carbon spherical powder, 400-630 micron, type 2 |
| Glassy carbon spherical powder, 630-1000 micron, type 1 |
| Glassy carbon spherical powder, 630-1000 micron, type 2 |
| Graphene nanoplatelets (6-8 nm thick x 15 microns wide) |
| Graphene nanoplatelets (6-8 nm thick x 25 microns wide) |
| Graphene Oxide dispersion <500nm(C:1mg/ml solvent:water) |
| Graphene Oxide dispersion <500nm(C:2mg/ml solvent:water) |
| Graphene Oxide dispersion >500 nm(C:1mg/ml solvent:NMP) |
| Graphene Oxide dispersion >500 nm(C:1mg/ml solvent:water) |
| Graphene Oxide dispersion >500 nm(C:2mg/ml solvent:NMP) |
| Graphene Oxide dispersion >500 nm(C:2mg/ml solvent:water) |
| Graphite plate, resin impregnated, 6.35mm (0.25in) thick |
| Graphite rod, 1.27cm (0.5in) dia x 61cm (24in) long |
| Graphite rod, 2.54cm (1.0in) dia x 61cm (24in) long |
| Graphite rod, 6.3mm (0.25in) dia. x 61cm (24in) long |
| Graphitized Carboxyl Multi-Walled Carbon Nanotubes 10-20nm |
| Graphitized Carboxyl Multi-Walled Carbon Nanotubes 20-30nm |
| Graphitized Carboxyl Multi-Walled Carbon Nanotubes 8-15nm |
| Graphitized Carboxyl MultiWalled Carbon Nanotubes 30-50nm |
| Graphitized Hydroxy Multi-Walled Carbon Nanotubes 10-20nm |
| Graphitized Hydroxy Multi-Walled Carbon Nanotubes >50 nm |
| Graphitized Hydroxy Multi-Walled Carbon Nanotubes 30-50nm |
| Graphitized Hydroxy MultiWalled Carbon Nanotubes 20-30nm |
| High Purified Single-walled carbon nanotubes(SWCNTS) 1-2nm |
| Industrial Single-walled carbon nanotubes (SWNTs) 1-2 nm |
| Monolayer Graphene on SiO2/Si(Size of SiO2:1.5cmx1.5cm) |
| Ni Coated Multi-walled carbon nanotubes (Ni-MWNT) >50nm |
| Short Multi Wall Carbon Nanotubes (Short-MWNTs) 10-20nm |
| Short Purified Amio Single-walled Carbon Nanotubes 1-2nm |
| Short Single-walled carbon nanotubes (Short-SWNTs) 1-2 nm |
| Trivial Transfer Graphenetrade mark 1cmx1cm(10-15 layers) |
| Carbon - Vitreous, rod, 100mm, diameter 1.0mm, glassy carbon |
| Carbon - Vitreous, rod, 100mm, diameter 10mm, glassy carbon |
| Carbon - Vitreous, rod, 100mm, diameter 3.0mm, glassy carbon |
| Carbon - Vitreous, rod, 100mm, diameter 5.0mm, glassy carbon |
| Carbon - Vitreous, rod, 100mm, diameter 7.0mm, glassy carbon |
| Carbon - Vitreous, rod, 200mm, diameter 1.0mm, glassy carbon |
| Carbon - Vitreous, rod, 200mm, diameter 10mm, glassy carbon |
| Carbon - Vitreous, rod, 200mm, diameter 3.0mm, glassy carbon |
| Carbon - Vitreous, rod, 200mm, diameter 5.0mm, glassy carbon |
| Carbon - Vitreous, rod, 200mm, diameter 7.0mm, glassy carbon |
| Carbon - Vitreous, rod, 50mm, diameter 1.0mm, glassy carbon |
| Carbon - Vitreous, rod, 5mm, diameter 3.0mm, glassy carbon |
| Carbon Nanotube Sponges (L: 10 cm, W: 4 cm, H: 0.5 cm) |
| Carbon Nanotube Sponges (L: 2 cm, W: 2 cm, H: 0.5 cm) |
| Carbon Nanotube Sponges (L: 5 cm, W: 2 cm, H: 0.5 cm) |
| Carboxyl Multi wall carbon nanotubes (MWNTs-COOH) 20-30nm |
| Graphene Oxide dispersion <500nm(C:0.5mg/ml solvent:water) |
| Graphene Oxide dispersion >500 nm(C:0.5mg/ml solvent:NMP) |
| Graphene Oxide dispersion >500 nm(C:0.5mg/ml solvent:water) |
| Graphene Oxide dispersion >500 nm(C:1mg/ml solvent:ethanol ) |
| Graphene Oxide dispersion >500 nm(C:2mg/ml solvent:ethanol ) |
| Graphite powder, natural, microcrystal grade, APS 2-15 micron |
| Graphite rod, 13cm (5.125in) dia x 30.5cm (12in) long |
| Graphite rod, 3.05mm (0.12in) dia x 305mm (12in) long |
| Graphite rod, 6.15mm (0.242in) dia x 102mm (4in) long |
| HDPlas Functionalized Graphene Nanoplatelet(NH3 functionalized) |
| Highly oriented pyrolytic graphite Grade A(Size: 10x10x1.0mm) |
| Highly oriented pyrolytic graphite Grade A(Size:20x20x1.0 mm) |
| Highly oriented pyrolytic graphite Grade B(Size::5x5x1.0 mm) |
| Highly oriented pyrolytic graphite Grade B(Size:10x10x1.0 mm) |
| Highly oriented pyrolytic graphite Grade B(Size:20x20x1.0 mm) |
| Highly oriented pyrolytic graphite Grade C(Size:10x10x1.0 mm) |
| Highly oriented pyrolytic graphite Grade C(Size:5x5x1.0 mm) |
| Hydroxy Purified Multi-walled carbon nanotubes (MWNTs-OH) <8nm |
| Industrial Carboxyl Grade Multi-walled carbon nanotubes >50nm |
| Industrial Hydroxy Grade Multi-walled carbon nanotubes >50nm |
| Industrial Hydroxy Grade Multi-walled carbon nanotubes 10-30nm |
| Industrial Hydroxy Grade Multi-walled carbon nanotubes 20-40nm |
| Multi-walled carbon nanotubes (MWNTs), 95%, OD 40-60 nm |
| Multi-walled carbon nanotubes (MWNTs), 95+%, OD 50-80 nm |
| Ni Coated Multi-walled carbon nanotubes (Ni-MWNT) 10-20 nm |
| Ni Coated Multi-walled carbon nanotubes (Ni-MWNT) 20-30nm |
| Ni Coated Multi-walled carbon nanotubes (Ni-MWNT) 30-50 nm |
| Ni Coated Multi-walled carbon nanotubes (Ni-MWNT) 8-15 nm |
| Short Purified Multi-Walled Carbon Nanotubes(Short-MWNTs) <8nm |
| Specific Graphene for Heat Dissipation and Antistatic Plastics |
| -COOH Functionalized Single-walled carbon nanotubes (SWNTs-COOH) |
| Carbon - Vitreous, foil, 10x10mm, thickness 1.0mm, glassy carbon |
| Carbon - Vitreous, foil, 10x10mm, thickness 2.0mm, glassy carbon |
| Carbon - Vitreous, foil, 10x10mm, thickness 4.0mm, glassy carbon |
| Carbon - Vitreous, foil, 25x25mm, thickness 0.5mm, glassy carbon |
| Carbon - Vitreous, foil, 25x25mm, thickness 4.0mm, glassy carbon |
| Carbon - Vitreous, foil, 50x50mm, thickness 1.0mm, glassy carbon |
| Carbon - Vitreous, foil, 50x50mm, thickness 4.0mm, glassy carbon |
| Carbon - Vitreous, foil, 8mm disks, thickness 1.0mm, glassy carbon |
| Carbon - Vitreous, foil, 8x8mm, thickness 0.5mm, glassy carbon |
| Carbon, foil, 25x25mm, thickness 0.2mm, flexible graphite, 99.8% |
| Carbon, foil, 50x50mm, thickness 0.2mm, flexible graphite, 99.8% |
| Carbon, foil, 50x50mm, thickness 0.5mm, flexible graphite, 99.8% |
| Carbon, foil, 50x50mm, thickness 1.0mm, flexible graphite, 99.8% |
| Fullerene, nanotube, multi-walled, 20 nm OD, 5-20 micron long |
| Graphene film deposited on TEM grids(Carbon film, 5 pieces per box) |
| Graphene film deposited on TEM grids(Copper mesh, 5 pieces per box) |
| Graphene Oxide dispersion >500 nm(C:0.5mg/ml solvent:ethanol ) |
| Graphite powder, natural, universal grade, -200 mesh, 99.9995% |
| Graphite, Fusion Crucible, drillpoint, unpurified, volume 7.5cc |
| Graphite, Fusion Crucible, drillpoint, unpurified, volume 7.88cc |
| HDPlas Functionalized Graphene Nanoplatelet(Argon functionalized) |
| HDPlas Functionalized Graphene Nanoplatelet(Carboxyl functionalized) |
| HDPlas Functionalized Graphene Nanoplatelet(Nitrogen functionalized) |
| HDPlas Functionalized Graphene Nanoplatelet(Oxygen functionalized) |
| Highly oriented pyrolytic graphite Grade C(Size: 20x20x1.0 mm) |
| Hydroxy Purified Multi-walled carbon nanotubes (MWNTs-OH) >50 nm |
| Hydroxy Purified Multi-walled carbon nanotubes (MWNTs-OH) 10-20nm |
| Hydroxy Purified Multi-walled carbon nanotubes (MWNTs-OH) 20-30nm |
| Hydroxy Purified Multi-walled carbon nanotubes (MWNTs-OH) 30-50nm |
| Hydroxy Purified Single-walled carbon nanotubes (SWNTs-OH) 1-2 nm |
| Industrial Carboxyl Grade Multi-walled carbon nanotubes 10-30nm |
| Industrial Carboxyl Grade Multi-walled carbon nanotubes 20-40 nm |
| PELCO 2 Layers Graphene Oxide TEM Support Films on Lacey Carbon |
| PELCO 6-8 layers CVD Graphene deposited on TEM Grids Lacey Carbon |
| Short High Purified Single-walled carbon nanotubes(SWCNTS) 1-2nm |
| Short Hydroxy Double-Walled Crabon Nanotubes (DWNTs-COOH) 2-4nm |
| Short Industrial Singlewalled carbon nanotubes (Short-SWNTs) 1-2 nm |
| Short Purified Multi-Walled Carbon Nanotubes (Short-MWNTs) >50 nm |
| Short Purified Multi-Walled Carbon Nanotubes (Short-MWNTs) 20-30nm |
| Short Purified Multi-Walled Carbon Nanotubes (Short-MWNTs) 8-15nm |
| -COOH Functionalized Multi-walled Carbon Nanotubes (MWNTs-COOH) <8nm |
| -COOH Functionalized multi-walled carbon nanotubes (MWNTs-COOH), 95% |
| 2 layer Graphene deposited on TEM Grids(Carbon mesh, 5 pieces per box) |
| 3-5 layer Graphene deposited on TEM Grids(Copper grid, 5 pieces per box) |
| 3-5 layers Graphene deposited on TEM Grids(Carbon mesh, 5 pieces per box) |
| 6-8 layer Graphene deposited on TEM Grids(Copper grid, 5 pieces per box) |
| 6-8 layers Graphene deposited on TEM Grids(Carbon mesh, 5 pieces per box) |
| ACS Material 2 layers CVD Graphene deposited on TEM Grids Copper grid |
| ACS Material 2 layers CVD Graphene deposited on TEM Grids Lacey Carbon |
| ACS Material 3-5 layer CVD Graphene deposited on TEM Grids Copper grid |
| ACS Material 3-5 layers CVD Graphene deposited on TEM Grids Lacey Carbon |
| ACS Material 6-8 layer CVD Graphene deposited on TEM Grids Copper grid |
| ACS Material single layer CVD Graphene deposited on TEM Grids Copper grid |
| ACS Material Single layer CVD Graphene deposited on TEM Grids Lacey Carbon |
| ACS Material Single Layer Graphene Oxide TEM Support Films on Lacey Carbon |
| Bilayer Graphene on SiO2/Si(Size of SiO2:Size of SiO2: 1.5cmx1.5cm) |
| Carbon - Vitreous, foil, 100x100mm, thickness 1.0mm, glassy carbon |
| Carbon - Vitreous, foil, 100x100mm, thickness 2.0mm, glassy carbon |
| Carbon - Vitreous, foil, 100x100mm, thickness 6.0mm, glassy carbon |
| Carbon - Vitreous, foil, 10mm disks, thickness 0.2mm, glassy carbon |
| Carbon - Vitreous, foil, 200x200mm, thickness 1.0mm, glassy carbon |
| Carbon - Vitreous, foil, 25mm disks, thickness 0.2mm, glassy carbon |
| Carbon sputtering target, 50.8mm (2.0in) dia x 3.18mm (0.125in) thick |
| Carbon sputtering target, 76.2mm (3.0in) dia x 3.18mm (0.125in) thick |
| Carbon, foil, 100x100mm, thickness 0.2mm, flexible graphite, 99.8% |
| Carbon, foil, 100x100mm, thickness 0.35mm, flexible graphite, 99.8% |
| Carbon, foil, 100x100mm, thickness 0.5mm, flexible graphite, 99.8% |
| Carbon, foil, 100x100mm, thickness 1.0mm, flexible graphite, 99.8% |
| Carbon, foil, 10mm disks, thickness 0.2mm, flexible graphite, 99.8% |
| Carbon, foil, 150x150mm, thickness 0.2mm, flexible graphite, 99.8% |
| Carbon, foil, 150x150mm, thickness 0.35mm, flexible graphite, 99.8% |
| Carbon, foil, 150x150mm, thickness 0.5mm, flexible graphite, 99.8% |
| Carbon, foil, 150x150mm, thickness 1.0mm, flexible graphite, 99.8% |
| Carbon, foil, 15mm disks, thickness 0.2mm, flexible graphite, 99.8% |
| Carbon, foil, 250x250mm, thickness 0.35mm, flexible graphite, 99.8% |
| Carbon, foil, 250x250mm, thickness 0.5mm, flexible graphite, 99.8% |
| Carbon, foil, 250x250mm, thickness 1.0mm, flexible graphite, 99.8% |
| Carbon, foil, 25mm disks, thickness 0.2mm, flexible graphite, 99.8% |
| Carbon, foil, 25x25mm, thickness 0.1mm, pyrolytic graphite, 99.99% |
| Carbon, foil, 25x25mm, thickness 0.5mm, pyrolytic graphite, 99.99% |
| Carbon, foil, 300x300mm, thickness 0.2mm, flexible graphite, 99.8% |
| Carbon, foil, 4mm disks, thickness 0.2mm, flexible graphite, 99.8% |
| Carbon, foil, 500x500mm, thickness 0.2mm, flexible graphite, 99.8% |
| Carbon, foil, 500x500mm, thickness 0.35mm, flexible graphite, 99.8% |
| Carbon, foil, 500x500mm, thickness 0.5mm, flexible graphite, 99.8% |
| Carbon, foil, 500x500mm, thickness 1.0mm, flexible graphite, 99.8% |
| Carbon, foil, 50mm disks, thickness 0.2mm, flexible graphite, 99.8% |
| Carbon, foil, 50x50mm, thickness 0.1mm, pyrolytic graphite, 99.99% |
| Carbon, foil, 50x50mm, thickness 0.2mm, pyrolytic graphite, 99.99% |
| Carbon, foil, 50x50mm, thickness 0.35mm, flexible graphite, 99.8% |
| Carbon, foil, 6mm disks, thickness 0.2mm, flexible graphite, 99.8% |
| Carbon, foil, 8mm disks, thickness 0.2mm, flexible graphite, 99.8% |
| Carboxyl Purified Multi-walled carbon nanotubes (MWNTs-COOH) >50 nm |
| Carboxyl Purified Multi-walled carbon nanotubes (MWNTs-COOH) 10-20nm |
| Carboxyl Purified Single-walled carbon nanotubes (SWNTs-COOH) 1-2 nm |
| Graphene oxide dispersion Diameter 50-200nm(C:0.5mg/ml solvent:water) |
| Graphene oxide dispersion Diameter 50-200nm(C:1mg/ml solvent:water) |
| Graphene oxide dispersion Diameter 50-200nm(C:2mg/ml solvent:water) |
| Graphite electrode, counter-pointed tip, 3.06mm dia, 38.10 mm long |
| Graphite electrode, counter-spherical tip, 6.15mm dia, 38.10 mm long |
| Graphite plate, pyrolytic, 1.27x9.98x9.98mm (0.05x0.393x.393in) |
| Graphite powder, microcrystalline, -300 mesh, 75-82% C, 18-25% Ash |
| Graphite rod, pyrolytic coated, 2mm (0.08in) dia x 152mm (6in) long |
| HDPlas Functionalized Graphene Nanoplatelet(Fluorocarbon functionalized) |
| High Purified Hydroxylate Single-walled carbon nanotubes (SWCNTS-OH) 1-2nm |
| High Purified Large Surface Area Single-walled Carbon nanotubes 1-2nm |
| Highly oriented pyrolytic graphite Grade A(Size: 20x20x(1.6~2.0)mm) |
| Highly oriented pyrolytic graphite Grade B(Size :20x20x(1.6-2.0) mm) |
| Highly oriented pyrolytic graphite Grade B(Size:30x30x(1.6-2.0)mm) |
| Highly oriented pyrolytic graphite Grade C(Size: 20x20x(1.6-2.0)mm) |
| Highly oriented pyrolytic graphite Grade C(Size: 30x30x(1.6-2.0)mm) |
| Industrial Carboxyl Single-Walled Crabon Nanotubes (SWNTS-COOH) 1-2 nm |
| Industrial Hydroxy Single-walled Carbon Nanotubes (SWNTs-OH) 1-2 nm |
| Methane, compressed or natural gas, compressed (with high methane content) |
| Multi-walled carbon nanotubes (MWNTs), 95%, Outside diameter 10-20 nm |
| Multi-walled carbon nanotubes (MWNTs), 95%, Outside diameter 20-30 nm |
| Short Carboxyl single-walled CrabonNanotubes (Short-SWNTS-COOH) 1-2 nm |
| Short Hydroxy Purified Multi-Walled Carbon Nanotubes (Short-MWNTs-OH) <8nm |
| Short Hydroxy single-walled Crabon Nanotubes (Short-SWNTs-OH) 1-2 nm |
| Single layer Graphene deposited on TEM Grids(Carbon mesh, 5 pieces per box) |
| Single layer Graphene deposited on TEM Grids(Copper grid, 5 pieces per box) |
| 2 layers Graphene deposited on TEM Grids Cu grid(Copper grid, 5 pieces per box) |
| Carbon - Vitreous, foam, 150x150mm, 0.05g.cmu??, porosity 96.5%, 24 pores/cm |
| Carbon - Vitreous, foam, 275x330mm, 0.05g.cmu??, porosity 96.5%, 24 pores/cm |
| Carbon nanotube array, multi-walled, on quartz (diameter= 100nm, length=30 microns) |
| Carbon nanotube array, multi-walled, vertically aligned on copper wafer substrate |
| Carbon nanotube array, multi-walled, vertically aligned on silicon wafer substrate |
| Carbon nanotubes, multi-walled (diameter= 140nm, length= 7microns)(>90%nanotubes) |
| Carbon, chopped fiber, 100g, nominal diameter 0.007mm, fiber length 6mm, grade 34-700 |
| Carbon, chopped fiber, 200g, nominal diameter 0.007mm, fiber length 1mm, grade 34-700 |
| Carbon, chopped fiber, 200g, nominal diameter 0.007mm, fiber length 6mm, grade 34-700 |
| Carbon, foil, 100x100mm, thickness 0.125mm, rigid graphite, fine grain size, 99.95% |
| Carbon, foil, 100x100mm, thickness 0.25mm, rigid graphite, fine grain size, 99.95% |
| Carbon, foil, 100x100mm, thickness 0.25mm, rigid graphite, fine grain size, 99.997% |
| Carbon, foil, 100x100mm, thickness 0.5mm, rigid graphite, fine grain size, 99.95% |
| Carbon, foil, 100x100mm, thickness 0.5mm, rigid graphite, fine grain size, 99.997% |
| Carbon, foil, 100x100mm, thickness 1.0mm, rigid graphite, fine grain size, 99.95% |
| Carbon, foil, 100x100mm, thickness 10.0mm, rigid graphite, medium grain size, 99.5% |
| Carbon, foil, 100x100mm, thickness 2.5mm, rigid graphite, fine grain size, 99.95% |
| Carbon, foil, 100x100mm, thickness 5.0mm, rigid graphite, medium grain size, 99.5% |
| Carbon, foil, 12.5x12.5mm, thickness 0.125mm, rigid graphite, fine grain size, 99.95% |
| Carbon, foil, 12mm disks, thickness 0.5mm, rigid graphite, fine grain size, 99.95% |
| Carbon, foil, 12mm disks, thickness 1.0mm, rigid graphite, fine grain size, 99.95% |
| Carbon, foil, 150x150mm, thickness 0.125mm, rigid graphite, fine grain size, 99.95% |
| Carbon, foil, 150x150mm, thickness 0.25mm, rigid graphite, fine grain size, 99.95% |
| Carbon, foil, 150x150mm, thickness 0.5mm, rigid graphite, fine grain size, 99.95% |
| Carbon, foil, 150x150mm, thickness 1.0mm, rigid graphite, fine grain size, 99.95% |
| Carbon, foil, 150x150mm, thickness 10.0mm, rigid graphite, medium grain size, 99.5% |
| Carbon, foil, 150x150mm, thickness 5.0mm, rigid graphite, medium grain size, 99.5% |
| Carbon, foil, 200x200mm, thickness 1.0mm, rigid graphite, fine grain size, 99.95% |
| Carbon, foil, 25x25mm, thickness 0.125mm, rigid graphite, fine grain size, 99.95% |
| Carbon, foil, 25x25mm, thickness 0.15mm, rigid graphite, fine grain size, 99.95% |
| Carbon, foil, 25x25mm, thickness 0.25mm, rigid graphite, fine grain size, 99.95% |
| Carbon, foil, 25x25mm, thickness 0.25mm, rigid graphite, fine grain size, 99.997% |
| Carbon, foil, 25x25mm, thickness 0.5mm, rigid graphite, fine grain size, 99.95% |
| Carbon, foil, 25x25mm, thickness 0.5mm, rigid graphite, fine grain size, 99.997% |
| Carbon, foil, 25x25mm, thickness 1.0mm, rigid graphite, fine grain size, 99.95% |
| Carbon, foil, 25x25mm, thickness 2.5mm, rigid graphite, fine grain size, 99.95% |
| Carbon, foil, 48x48mm, thickness 10.0mm, rigid graphite, medium grain size, 99.5% |
| Carbon, foil, 50x50mm, thickness 0.125mm, rigid graphite, fine grain size, 99.95% |
| Carbon, foil, 50x50mm, thickness 0.25mm, rigid graphite, fine grain size, 99.95% |
| Carbon, foil, 50x50mm, thickness 0.25mm, rigid graphite, fine grain size, 99.997% |
| Carbon, foil, 50x50mm, thickness 0.5mm, rigid graphite, fine grain size, 99.95% |
| Carbon, foil, 50x50mm, thickness 0.5mm, rigid graphite, fine grain size, 99.997% |
| Carbon, foil, 50x50mm, thickness 1.0mm, rigid graphite, fine grain size, 99.95% |
| Carbon, foil, 50x50mm, thickness 2.5mm, rigid graphite, fine grain size, 99.95% |
| Carbon, foil, 50x50mm, thickness 5.0mm, rigid graphite, medium grain size, 99.5% |
| Carbon, foil, not light tested, 100x100mm, thickness 0.075mm, flexible graphite, 99.8% |
| Carbon, foil, not light tested, 150x150mm, thickness 0.075mm, flexible graphite, 99.8% |
| Carbon, foil, not light tested, 150x150mm, thickness 0.125mm, flexible graphite, 99.8% |
| Carbon, foil, not light tested, 300x300mm, thickness 0.075mm, flexible graphite, 99.8% |
| Carbon, foil, not light tested, 300x300mm, thickness 0.125mm, flexible graphite, 99.8% |
| Carbon, mesoporous, nanopowder, <500 nm particle size (DLS), >99.95% trace metals basis |
| Carbon, microleaf, 24x70mm, thinness 5.0mum, specific density 1000mug/cm2, 99.997% |
| Carbon, microleaf, 25x70mm, thinness 1.25mum, specific density 250mug/cm2, 99.997% |
| Carbon, microleaf, 25x70mm, thinness 2.5mum, specific density 500mug/cm2, 99.997% |
| Carbon, microleaf, 50x70mm, thinness 1.25mum, specific density 250mug/cm2, 99.997% |
| Carbon, microleaf, 50x70mm, thinness 2.5mum, specific density 500mug/cm2, 99.997% |
| Charcoal briquettes, shell, screenings, wood, etc. [NA1361] [Spontaneously combustible] |
| Fullerene, nanotube, multi-walled, as-produced cathode deposits, core and shell |
| Graphene powder (1-5 layers thick x 0.5-5 microns wide, surface area 650-750 m2/g) |
| High Purified Carboxylic Single-walled carbon nanotubes (SWCNTS-COOH) 1-2nm |
| PELCO 2 Layers Graphene Oxide TEM Support Films on(Carbon mesh, 5 pieces per box) |
| PELCO Single Layer Graphene Oxide TEM Support Film(Carbon mesh, 5 pieces per box) |
| Short Carboxyl Purified Multi-Walled Carbon Nanotubes (Short-MWNTs-COOH) <8nm |
| Short Carboxyl Purified Multi-Walled Carbon Nanotubes (Short-MWNTs-COOH) 10-20nm |
| Short Carboxyl Purified Multi-Walled Carbon Nanotubes(Short-MWNTs-COOH) >50 nm |
| Short Carboxyl Purified Multi-Walled Carbon Nanotubes(Short-MWNTs-COOH) 20-30nm |
| Short Carboxyl Purified Multi-Walled Carbon Nanotubes(Short-MWNTs-COOH) 30-50nm |
| Short Carboxyl Purified Multi-Walled Carbon Nanotubes(Short-MWNTs-COOH) 8-15nm |
| Short High Purified Carboxylic Single-walled Carbon Nanotubes(SWCNTS-COOH) 1-2nm |
| Short High Purified Hydroxylate Single-walled Carbon Nanotubes(SWCNTS-OH) 1-2nm |
| Short Hydroxy Purified Multi-Walled Carbon Nanotubes (Short-MWNTs-OH) >50 nm |
| Short Hydroxy Purified Multi-Walled Carbon Nanotubes (Short-MWNTs-OH) 20-30nm |
| Short Hydroxy Purified Multi-Walled Carbon Nanotubes (Short-MWNTs-OH) 8-15nm |
| Total Organic Carbon (TOC), standard solution, Specpure?, 1000 microgram/ml |
| Carbon - Vitreous, foam, 150x150mm, thickness 2.5mm, bulk density 0.05g/cm3, porosity 96.5% |
| Carbon - Vitreous, foam, 150x150mm, thickness 3.2mm, bulk density 0.05g/cm3, porosity 96.5% |
| Carbon - Vitreous, foam, 275x330mm, thickness 3.2mm, bulk density 0.05g/cm3, porosity 96.5% |
| Carbon - Vitreous, foam, 300x300mm, thickness 20mm, bulk density 0.05g/cm3, porosity 96.5% |
| Carbon - Vitreous, foam, 300x300mm, thickness 30mm, bulk density 0.05g/cm3, porosity 96.5% |
| Carbon - Vitreous, tube, 100mm, outside diameter 10mm, inside diameter 3mm, wall thickness 3.5mm, glassy carbon |
| Carbon - Vitreous, tube, 50mm, outside diameter 10mm, inside diameter 3mm, wall thickness 3.5mm, glassy carbon |
| Carbon nanofibers, graphitized (iron-free), composed of conical platelets, D x L 100 nm x 20-200 mum |
| Carbon nanofibers, graphitized, platelets (conical), >98% carbon basis, D x L 100 nm x 20-200 mum |
| Carbon nanofibers, pyrolitically stripped, platelets (conical), >98% carbon basis, D x L 100 nm x 20-200 mum |
| Carbon nanotubes, multi-walled, arc-produced (diameter = 2-50nm, length = >2 microns) (55-65Wt% nanotubes) |
| Carbon, fabric coil, 0.5m, weight.mu?? 110g, thickness 0.5mm, ends x picks/10cm 130x130, plain weave |
| Carbon, fabric coil, 1m, weight.mu?? 110g, thickness 0.5mm, ends x picks/10cm 130x130, plain weave |
| Carbon, fabric, 1000x1000mm, weight.mu?? 375g, thickness 0.4mm, ends x picks/10cm 47x47, 2/2 twill weave |
| Carbon, fabric, 1000x1000mm, weight.mu?? 92g, thickness 0.15mm, ends x picks/10cm 69x69, plain weave |
| Carbon, fabric, 150x150mm, weight.mu?? 200g, thickness 0.3mm, ends x picks/10cm 50x50, plain weave |
| Carbon, fabric, 150x150mm, weight.mu?? 375g, thickness 0.4mm, ends x picks/10cm 47x47, 2/2 twill weave |
| Carbon, fabric, 250x250mm, weight.mu?? 92g, thickness 0.15mm, ends x picks/10cm 69x69, plain weave |
| Carbon, fabric, 300x300mm, weight.mu?? 110g, thickness 0.5mm, ends x picks/10cm 130x130, plain weave |
| Carbon, fabric, 500x500mm, weight.mu?? 375g, thickness 0.4mm, ends x picks/10cm 47x47, 2/2 twill weave |
| Carbon, fabric, 500x500mm, weight.mu?? 92g, thickness 0.15mm, ends x picks/10cm 69x69, plain weave |
| Carbon, fiber, 1000m, tex number 200, filament diameter 0.007mm, number of filaments 3000, grade tenax hta, epoxy sized |
| Carbon, fiber, 1000m, tex number 720, filament diameter 0.011mm, number of filaments 4000, grade p25, epoxy sized |
| Carbon, fiber, 1000m, tex number 795, filament diameter 0.007mm, number of filaments 12000, grade XaS, epoxy sized (1.6%) |
| Carbon, fiber, 100m, tex number 280, filament diameter 0.009mm, number of filaments 2000, grade f500, epoxy sized (1.0%) |
| Carbon, fiber, 100m, tex number 400, filament diameter 0.007mm, number of filaments 6000, grade tenax hta, epoxy sized (1.2%) |
| Carbon, fiber, 100m, tex number 400, number of filaments 12000, continuous multi-filament TOW. |
| Carbon, fiber, 10m, tex number 200, filament diameter 0.007mm, number of filaments 3000, grade tenax hta, epoxy sized |
| Carbon, fiber, 10m, tex number 400, filament diameter 0.007mm, number of filaments 6000, grade tenax hta, epoxy sized (1.2%) |
| Carbon, fiber, 10m, tex number 900, filament diameter 0.008mm, number of filaments 10000, grade hm, epoxy sized (0.7%) |
| Carbon, fiber, 200m, tex number 280, filament diameter 0.009mm, number of filaments 2000, grade f500, epoxy sized (1.0%) |
| Carbon, fiber, 200m, tex number 795, filament diameter 0.007mm, number of filaments 12000, grade XaS, epoxy sized (1.6%) |
| Carbon, fiber, 20m, tex number 400, number of filaments 12000, continuous multi-filament TOW. |
| Carbon, fiber, 20m, tex number 420, filament diameter 0.01mm, number of filaments 3000, grade f180, epoxy sized (1.0%) |
| Carbon, fiber, 20m, tex number 900, filament diameter 0.008mm, number of filaments 10000, grade hm, epoxy sized (0.7%) |
| Carbon, fiber, 500m, tex number 200, filament diameter 0.007mm, number of filaments 3000, grade tenax hta, epoxy sized |
| Carbon, fiber, 50m, tex number 280, filament diameter 0.009mm, number of filaments 2000, grade f500, epoxy sized (1.0%) |
| Carbon, fiber, 50m, tex number 400, filament diameter 0.007mm, number of filaments 6000, grade tenax hta, epoxy sized (1.2%) |
| Carbon, fiber, 50m, tex number 400, number of filaments 12000, continuous multi-filament TOW. |
| Carbon, fiber, 50m, tex number 795, filament diameter 0.007mm, number of filaments 12000, grade XaS, epoxy sized (1.6%) |
| Carbon, mesoporous, average pore diameter 100 ??+/-10 ?? (typical), >99.95% trace metals basis |
| Carbon, mesoporous, nanopowder, graphitized, <500 nm particle size (DLS), >99.95% trace metals basis |
| Carbon, microleaf, 25x70mm, thinness 0.0025mum, specific density 0.5mug/cm2, temporary glass support, 99.997% |
| Carbon, microleaf, 25x70mm, thinness 0.025mum, specific density 5mug/cm2, temporary glass support, 99.997% |
| Carbon, microleaf, 25x70mm, thinness 0.050mum, specific density 10mug/cm2, temporary glass support, 99.997% |
| Carbon, microleaf, 25x70mm, thinness 0.25mum, specific density 50mug/cm2, temporary glass support, 99.997% |
| Carbon, microleaf, 25x70mm, thinness 0.50mum, specific density 100mug/cm2, temporary glass support, 99.997% |
| Carbon, microleaf, 25x70mm, thinness 0.50mum, specific density 100mug/cm2, temporary glass support, annealed, 99.997% |
| Carbon, tube, graphite, 100mm, outside diameter 12.7mm, inside diameter 9.5mm, wall thickness 1.6mm, 99.95% |
| Carbon, tube, graphite, 100mm, outside diameter 3.18mm, inside diameter 1.18mm, wall thickness 1.0mm, 99.95% |
| Carbon, tube, graphite, 100mm, outside diameter 6.35mm, inside diameter 3.15mm, wall thickness 1.6mm, 99.95% |
| Carbon, tube, graphite, 150mm, outside diameter 12.7mm, inside diameter 9.5mm, wall thickness 1.6mm, 99.95% |
| Carbon, tube, graphite, 150mm, outside diameter 3.18mm, inside diameter 1.18mm, wall thickness 1.0mm, 99.95% |
| Carbon, tube, graphite, 150mm, outside diameter 6.35mm, inside diameter 3.15mm, wall thickness 1.6mm, 99.95% |
| Carbon, tube, graphite, 47mm, outside diameter 6.35mm, inside diameter 3.15mm, wall thickness 1.6mm, 99.95% |
| Carbon, tube, graphite, 50mm, outside diameter 12.7mm, inside diameter 9.5mm, wall thickness 1.6mm, 99.95% |
| Carbon, tube, graphite, 50mm, outside diameter 3.18mm, inside diameter 1.18mm, wall thickness 1.0mm, 99.95% |
| Graphite electrode, crater-drillpoint/undercut, 4.57mm dia, 38.10mm length, volume 0.040cc |
| Graphite fusion crucible lid for stock number 40794, 2.54cm (1.0in) dia, 6.35mm (0.25in) thick |
| Graphite plate, highly oriented pyrolytic graphite (HOPG), 10x10x(1.6min)mm (0.394x0.394x0.079in), 0.4 +0.1 o mosaic angle |
| Graphite plate, highly oriented pyrolytic graphite (HOPG), 10x10x(1.6min)mm (0.394x0.394x0.079in), 0.8 +0.2 o mosaic angle |
| Graphite plate, highly oriented pyrolytic graphite (HOPG), 10x10x1mm (0.394x0.394x0.039in), 0.4 +0.1 o mosaic angle |
| Graphite plate, highly oriented pyrolytic graphite (HOPG), 10x10x1mm (0.394x0.394x0.039in), 0.8 +0.2 o mosaic angle |
| MeH |
| Methane, compressed or natural gas, compressed (with high methane content) [UN1971] [Flammable gas] |
| Methane, refrigerated liquid (cryogenic liquid) or natural gas, refrigerated liquid (cryogenic liquid) (with high methane content) |
| Methane, refrigerated liquid (cryogenic liquid) or natural gas, refrigerated liquid (cryogenic liquid) (with high methane content) [UN1972] [Flammable gas] |
| OH functionalized Single-walled carbon nanotubes (SWNTs-OH), Purity (excluding -OH): 90% CNTs, 60% SWNTs, Content of -OH: 3.76-4.16 wt% |
| OH functionalized Single-walled carbon nanotubes (SWNTs-OH), Purity (excluding -OH): 95% CNTs, 90% SWNTs, Content of ?OH: 3.76-4.16 wt% |